Other

Vendor Part # BKCJ-0500

Designed for BB86/BB92 frames (with 41mm ID press-fit BB shell) - Compatible with 30mm crankset spindles. - XD-15 Ceramic-Hybrid cartridge bearings pressed directly into the BB shell, that feature - Deep-groove raceways allowing for maximum sized Grade 3 Silicon Nitride ceramic balls, increased contact area and improved performance and longevity. Vendor Part # BKC-7021

Designed for BB86/BB92 frames (with 41mm ID press-fit BB shell) - Compatible with SRAM DUB cranksets (28.99mm spindle) - XD-15 Ceramic-Hybrid cartridge bearings pressed directly into the BB shell, that feature - Deep-groove raceways allowing for maximum sized Grade 3 Silicon Nitride ceramic balls, increased contact area and improved performance and longevity. Vendor Part # BKC-7022

Designed for BSA 68/73mm bottom bracket shells when using a SRAM DUB Crankset. - Grade 3 Ceramic balls (Si3N4), with ABEC 5 precision - CN Bearing Clearance - Races are ultra-durable for longer life! Nitrogen infused steel, heat treated and cryogenically frozen - These bearings are 3.5 times more corrosion resistant than stainless steel - Will not rust; little servicing required - Silicone seals. These are the lowest friction bearings available; period! Vendor Part # BKC-0815

Cassette spacers, bottom bracket spacers and hardware for HollowtechII, GXP, BB30/PF30. - Comprehensive shop kit for bottom bracket and cassette/freewheel spacing needs - 120 pc. kit in durable plastic storage box

Replacement lever blades for Magura disc brakes

Service your suspension fork with Enduro Seal KIts. - Custom made for each make and model of fork

Thumbies are the original upright handlebar mount and easily transform bar end (aka barcon) shifters into thumb shifters. - 6061 Aluminum - Fits 22.2mm handlebars - Hinged clamp for easy installation - Compatible with Shimano bar end shifters (not included) - Updated! now have raised platforms to clear hydraulic disc brake levers - 60g

- Lightweight, durable alloy clamp system designed specifically to work with the Contact SLR Aero Integrated or Contact SLR Aero handlebars for 2018+ Propel Advanced Disc and 2019+ Propel Advanced - Quick easy one bolt setup adjustment and wide-range armrest positioning - Fits Giant Contact SL/Connect SL bar extensions (22.2mm) - Armrest pads included

Replacement lever blades for Magura disc brakes

MaxHit is Enduro's latest patent-pending innovation; where the bearing is actually the component. MaxHit bottom bracket bearings are designed to thread directly into your bicycles bottom bracket shell, eliminating the need for the aluminum cups that are traditionally used to carry the bearings. This unique design frees-up space for much larger balls that more than double the load capacity compared to standard BB bearings. The kit includes a full selection seals and spacers to ensure proper installation in any BSA threaded bike. Machined entirely from 440C stainless steel and guaranteed for life, MaxHit BB bearings include proprietary double-lip labyrinth seals and Enduros extra high pressure grease to ensure a lifetime of trouble-free, heavy duty performance. Made in the USA Vendor Part # BKSM-8112 This BB requires a Shimano XT BB tool for install and removal (ex. Abbey BB SCT, Park LRT-4)

Designed for frames with threaded BSA 73mm BB shell - Compatible with cranksets with a 30mm spindle greater than 104mm in length - Stainless steel angular contact bearings: 440C Stainless steel balls and races - Machined aluminum cups, Black ano Vendor Part # BKS-6053

With Garbaruk RD cage set for 12-speed SRAM AXS rear derailleurs, you can squeeze much more performance out of your drivetrain thanks to the combination of rear derailleur cage, oversized pulleys and extender link which allows to get more drivetrain range, smooth shifting, and more precise operation of your bike transmission. You can now use cassettes up to 52T to build up your Gravel/CX bike. By re-positioning the upper derailleur pulley closer to the small cassette cog and further away from the largest cog, we have been able to allow rear derailleurs designed to be used with 10-33T cassettes to be capable of running smoothly with 10-52T cassette. Fully compatible with Sram 12-speed AXS flattop chain. IMPORTANT: To be used in 1x setup only with the listed compatible rear derailleurs. Compatibilitty: SRAM 12sp RED AXS, SRAM 12sp FORCE AXS, 12sp Rival AXS, SRAM etap 11speed A2 rear mech, with 11/12-speed chains including Shimano HG+ and SRAM AXS flattop.

We set out to make the toughest, most precisely machined, most adjustable dropper trigger on the market. After numerous prototypes and over a year of testing, we’re proud to present a dropper trigger with stacked dual sealed cartridge bearings, two different cable clamp options, a barrel adjuster, and a hinged clamp. Machined by us right here in Chico California to the highest tolerances. - 6061 Aluminum - 22.2mm Clamp Diameter - 40g

NOTE: The crank spindle length, must be long enough to allow for proper crank arm installation. - This BB includes x2, DRF3041 bearings, plus the necessary spacers and washers - Adapts cranksets with 30mm spindle, to fit BB86/BB92 frames (with 41mm ID press-fit BB shell) - Bearing OD is stepped (a 44mm lip interfaces with BB shell face) - Double row deep groove radial, with 440C Stainless Steel balls and races (ABEC-3 precision) - Provides maximum corrosion resistance in applications and environments where critical - Filled with Marine High Pressure grease - 80g

Mounted in place of a front derailleur, the Chain Keeper works with single and 1x multispeed drivetrains using a narrow chain. The chain block surrounds the chain as it meets the chainring and prevents it from skipping off. Designed with adjustability in mind, the Chain Keeper can accommodate a range of chain line measurements and chainring sizes. - AL6061, black ano - Portion of seat tube where the clamp mounts must have a circular profile - For frames with tapered seat tubes, the Chain Keeper Extension can be used to raise the clamp to a higher section of tubing with a straight circular profile - 69g *** For more detailed information, please see the Chain Keeper Fit Guide at: http://paulcomp.com/chain-keeper-guide

Mounted in place of a front derailleur, the Chain Keeper works with single and 1x multi speed drivetrains using a narrow chain. The chain block surrounds the chain as it meets the chainring and prevents it from skipping off. - Accommodates a range of chain line measurements and chainring sizes - Not designed for downhill/freeride/big hit use

Mounted in place of a front derailleur, the Chain Keeper works with single and 1x multi speed drivetrains using a narrow chain. The chain block surrounds the chain as it meets the chainring and prevents it from skipping off. - Accommodates a range of chain line measurements and chainring sizes - Not designed for downhill/freeride/big hit use

Master cylinder assemblies for Magura brakes include a master cylinder, lever blade and handlebar clamp. Hose fittings and line are sold separately. Flip flop design allows unit to be mounted to either the left or right side.

With our Yokes, we offer a clever solution that allows you to replace your Specialized rear shock with a regular standard sized shock. Yokes are CNC-machined from a single piece of 6061-T6 aluminum and anodized in a stylish black finish. Converting the Yoke is fairly easy, as all the necessary parts are included in the scope of delivery or can be taken directly from the bike. Fits: Epic 2021-2024 models Includes: 1x BikeYoke EP03 1x DU bushing 1x reducer 1x stainless steel bolt Matching shock dimensions: - 210x52.5 - 210x50 (note: rear travel will be reduced by approximately 5mm)

This BikeYoke allows the use of a standard shock in your Specialized bike. Enduro 2013-2016, 29" Enduro 2014, 26" Includes: - 1x BikeYoke #3 (Y03 for 200 x 57/7.875"x2.25" shock) - 1x DU bushing - 1x reducer - 1x stainless steel bolt

Assortment of chainring spacers (20) 0.6mm (20) 1.2mm (5) 2mm (5) 3.8mm (5) 2.2mm (5) 3mm (5) 3.5mm (10) 4mm (10) 4.3mm (10) 4.6mm (10) 5mm (5) 5.3mm (5) 7.1mm (5) 8.3mm 120 pcs. in clear plastic storage box

Magura service kits come in a variety of packages to fit your needs.

Replacement lever blades for Magura disc brakes

Bearings for Chris King DropSet headsets. Chris King made-in-house bearings are designed to last a lifetime and are fully serviceable. We encourage you to service your bearings before resorting to replacement. 41mm Steel—PHS804 (Fits DropSet 3) 42mm Steel—PHS806 (Fits DropSet 2 and DropSet 4) 52mm 45° Steel—PHS808 (Fits DropSet 2) 52mm 36° Steel—PHS810 (Fits DropSet 3)

- Lightweight 22.2mm carbon bars to be used with Giant Clip-on clamp system - 40-degree angle

Fit Kit SET815 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru axle. This kit includes: - 12 x 217—229mm thru axle with 1.0 mm thread pitch - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Fit Kit SET808 contains all the parts needed to thru-axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru-axle. This kit includes: - 12 x 223—229mm thru axle with 1.5 mm thread pitch - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Fit Kit SET705.R contains all the parts to mount the rack to the rigid fork of a road or gravel bike with a 12 mm thru axle. This kit includes: - 12 mm thru axle with 120 to 125 mm length and 1.5 mm thread pitch - A pair of pucks (rectangle, for mounting on rigid road/gravel forks) - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Fit Kit SET813 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the rear of your bike with a 12 mm rear thru axle. This kit includes: - 12 x 154—172mm thru axle with 1.0 mm thread pitch - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.