Other

Alloy headset spacer to fit 1 1/8in fork steerers. - Alloy with FSA logos

- Type: Headset bearing - Discipline: Road, MTB - Material: Steel - Weight: 26g - Dimension: 1-1/4-inch - Bearing Type: ACB - Angle: 45° x 45°

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

Fits: REVIVE/REVIVE 2.0, REVIVE MAX, and DIVINE Includes: - x1, Cable clamp body (# 52) - x1, M4 Set screw (# 7)

2x steel grip collar bolts For use with: - The Bartender Pro Grip - The Bartender Grip

FSA Mega Exo Small Parts.

Includes: 1 x Overdrive Aero spacer that fits directly below the Contact Aerolight SL series of stems

- Dust-proof and waterproof rubber seal cover - Protect the power source connection on the frame when the e-bike is parked outside or you carry it without the EnergyPak

- Dust-proof and waterproof rubber seal cover. - Protect the power source connection on the frame when the e-bike is parked outside or when you carry it without the EnergyPak.

5mm Spacers for internal travel adjust of REVIVE and REVIVE MAX dropper posts

Replacement chainring lock ring. Color: Black Material: Aluminum Compatible cranksets: Garbaruk XC Crankset Garbaruk Gravel Crankset Garbaruk Enduro Crankset Required tool: Enduro CT-001 / Shimano TL-FC33, or similar bottom bracket tool. Recommended tightening torque: 35Nm

Lost or rounded-off your stem bolts? Not to worry! Includes: 6 x Enduro MK3 Stem Steel bolts Note: Also compatible with Enduro MK2 Stemlts.

For cranksets with 30mm spindles. This seal that fits directly to the bearing, making it something of a universal fit. If there is any confusion, this seal will work. Enduro bearings are designed and built to last, but unfortunately sometimes some of the parts that surround them can still wear out. This light-contact silicone seal is the new universal face seal that comes with Enduro TorqTite Solid-Lube bottom brackets for 30mm spindles. This light contact seal seals directly to the bearing OD to make it a more universal fit. Apply a thin film of grease on the back side of the seal for optimum seal performance. Vendor Part # SE MX 3042 AL V2

An M6 bolt for fitting Mudhugger EVO Bolt-On to Rockshox Recon Gold & Silver 35 forks. Compatible with EVO Shorty Bolt-On and EVO (Long) Bolt-On fenders. NOTE: some Recon Gold/Silver do NOT have bolt holes; please check your forks before ordering. When fitting to your forks use the angle adjust shim provided in the default Bolt-On packaging to raise the tail end of the fender to the correct angle. Kit includes: - 1x M6 bolt, 10mm long

- 10-speed: stainless steel 6.1mm wide no tool chain connector for Shimano and Campagnolo - 9-speed: stainless steel 6.5mm wide no tool chain connector for Wippermann chains - 6-8 speed: stainless steel 6.8mm wide no tool chain connector for Wippermann chains

Replacement foam rings and bottom out bumper for your REVIVE MAX dropper post. The foam ring in the lower tube of your BikeYoke dropper post is a crucial component that prevents water and dirt from entering your post too easily. Keep it dry and clean at all times so your post can breathe and replace if needed. Kit includes: - 2x foam ring - 1x bottom out bumper

Replacement foam rings and bottom out bumper for your BikeYoke dropper post. The foam ring in the lower tube of your BikeYoke dropper post is a crucial component that prevents water and dirt from entering your post too easily. Keep it dry and clean at all times so your post can breathe and replace if needed. Kit includes: - 2x foam ring - 1x bottom out bumper Fits: - REVIVE (not REVIVE MAX) - DIVINE - DIVINE SL - DIVINE SL Rascal

This is a MegaExo Left Crank Bolt for 19mm MegaExo Cranks. - M12 bolt

The Enduro contact silicone seal is the same new universal face seal that comes with Enduro TorqTite Solid-Lube bottom brackets for SRAM DUB cranksets - Contact face seal seals directly to the bearing OD to make it a more universal fit - Apply a thin film of grease on the back side of the seal for optimum seal performance

This is an FSA Self-Extracting Left Crank Arm Bolt for Mega Exo ATB Cranks - 30mm long - 14g - Designed to fit FSA ATB cranks only - Includes M18 bolt, M27 self-extracting cap and washers

Tight tolerances and precise torque specs mean precision parts like this MegaExo 12 Left Arm Crank Bolt need to be replaced from time to time. Make sure the heart of your drivetrain is secure, and pick up a spare or two today.

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with Campagnolo 10-speed chains

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC and Shimano 10-speed chains - Includes 2 pairs

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

- Missing links to make chain installation, maintenance and reparation easier - Reusable up to 3 times - Compatible with 6, 7 and 8 speed IG drivetrains - Pin width: 7.1mm - Card of 2

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

Our clever Splits clamp attaches our Triggy directly to the handlebar. Special plastic compounds and production process allow flexibility within the clamp to have it installed, while grips and brakes are still on the bars. Just snap it on! A heat treated inlay made of stainless steel with a laser engraved finish, give it a unique and classy look. By the way: SRAM shifter triggers can also also be attached to the handlebars using our Splits clamp.

- Bolt On adapters

Frame clamps can be used to attach fender stays to suspension forks and other frame points of the bicycle as needed. - Includes 2 clamps and screws