Bottom Brackets

T47 threaded BB cups to run 30mm spindle cranks on T47 frames. Cups have outboard bearings and are typically used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, or a titanium-compatible anti-seize compound in titanium BB shells. - Bearings: Enduro Angular Contact - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width: 68 – 100mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Over Bearing Width: 91.2mm in 68mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 44mm x 16-notch

T47A Asymmetrical threaded BB cups for T47A frames and 30mm diameter spindle compatible cranks. Cups have internal bearings, and can be used in BB shells with widths from 77.5 - 79mm. Includes sleeve to fit between cups for added protection, and also keeps your internal wires and hoses from rubbing on the crank spindle. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. T47 external cup on the drive side T47 internal cup on the non-drive side Compatibility: Cervelo T47A 79mm shell width Factor T47A 77.5mm shell width Felt T47A 77mm shell width

External English (BSA) threaded bottom bracket for 73mm shells. Wheels Mfg uses only Enduro bearings and silicone seals for the most durable and smoothest bottom brackets available. Fully serviceable. Includes: (2) - Enduro Silicone dust seals (1) - 2.5mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 1.8mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 0.7mm aluminum BB cup spacers for use with 68mm wide BB shell (2) - 0.5mm crank spindle spacers (2) - 1.0mm crank spindle spacers (1) - Wave Washer Direct replacement for SRAM/Truvativ GXP bottom brackets! - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68-73mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: GXP (SRAM, Truvativ, Etc.) - Crank Spindle Diameter: 22/24mm - Weight: 116g

External English (BSA) threaded bottom bracket for 73mm shells. Wheels Mfg uses only Enduro bearings and silicone seals for the most durable and smoothest bottom brackets available. Fully serviceable. Includes: (2) - Enduro Silicone dust seals (1) - 2.5mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 1.8mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 0.7mm aluminum BB cup spacers for use with 68mm wide BB shell (2) - 0.5mm crank spindle spacers (2) - 1.0mm crank spindle spacers (1) - Wave Washer Direct replacement for SRAM/Truvativ GXP bottom brackets! - Bearings: Enduro Angular Contact - Color: Red - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68-73mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: GXP (SRAM, Truvativ, Etc.) - Crank Spindle Diameter: 22/24mm - Weight: 116g

Wheels Mfg solution for running a 30mm spindle crankset in a BSA threaded frame. Machined aluminum cups thread in to a standard threaded frame and feature Enduro 6806 ABEC-3 sealed bearings outboard of the BB shell. Fully serviceable. Notes: - For use with BB30 Wide 30mm diameter cranks with a spindle length of at least 104mm. - Will not work with standard BB30 cranksets. PLEASE MEASURE YOUR BB30 CRANK SPINDLE LENGTH! - Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29). - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: BB30 Wide, BB30a, 386EVO, Rotor 3D+, SRAM BB30 Wide - Crank Spindle Diameter: 30mm - Crank Spindle Length: At least 104mm - Weight: 102g

Wheels Mfg solution for running a 30mm spindle crankset in a BSA threaded frame. Machined aluminum cups thread in to a standard threaded frame and feature Enduro 6806 ABEC-3 sealed bearings outboard of the BB shell. Fully serviceable. Notes: - For use with BB30 Wide 30mm diameter cranks with a spindle length of at least 104mm. - Will not work with standard BB30 cranksets. PLEASE MEASURE YOUR BB30 CRANK SPINDLE LENGTH! - Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29). - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: BB30 Wide, BB30a, 386EVO, Rotor 3D+, SRAM BB30 Wide - Crank Spindle Diameter: 30mm - Crank Spindle Length: At least 104mm - Weight: 100g

Run 29mm spindle SRAM DUB compatible cranks in a BSA threaded frame. Machined aluminum cups thread into a standard threaded frame and feature Enduro 6806/29 ABEC-3 sealed bearings outboard of the BB shell. Fully serviceable. Bottom Bracket Includes: - BB Cups with bearings - 2 x Silicone dust seals - 2 x 0.5mm crank spindle spacers - 2 x 1.0mm crank spindle spacers - 1 x 2.5mm crank spindle spacer - Bearings: Enduro 6806/29 ABEC-3 - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68mm, 73mm, 100m - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Diameter: 29mm - Tool Pattern: 48.5mm x 16-notch - Over Bearing Width: 91.5mm in a 68mm wide shell - Weight: 102g Compatible with the following Bottom Bracket Standards and SRAM DUB compatible cranks with 29mm diameter spindle: - ISO/English or BSA Threaded (1.37 in x 24 TPI) - 68mm, 73mm, and 100mm BB Shell Width (if used in a 100mm wide shell, install the cups without the center plastic center sleeve)

Precision machined from 6061 T6 aluminum in Whistler, B.C.; this bottom bracket will keep your cranks spinning smoothly. Our staff has carefully crafted every part except for the quality Enduro bearings we carefully selected for a mix of quality, value, and durability. Each bottom bracket includes: - BB cups with bearings - 2x Dust seals - 2x 0.5mm spacers - 2x 1mm spacers Specifications: - Bearings: Enduro 71806 LLB ABEC-5 - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded - Bottom Bracket Shell Width: 68mm, 73mm - Crank Spindle Diameter: 30mm - Tool Pattern: 46mm OD, 12 notch

Precision machined from 6061 T6 aluminum in Whistler, B.C.; this bottom bracket will keep your cranks spinning smoothly. Our staff has carefully crafted every part except for the quality Enduro bearings we carefully selected for a mix of quality, value, and durability. Each bottom bracket includes: - BB cups with bearings - 2x Dust seals - 2x 0.5mm spacers - 2x 1mm spacers - 1x 4.5mm spacer (DUB only) Specifications: - Bearings: Enduro 71806 LLB ABEC-5 - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded - Bottom Bracket Shell Width: 68mm, 73mm - Crank Spindle Diameter: SRAM DUB 29mm - Tool Pattern: 46mm OD, 12 notch

Precision machined from 6061 T6 aluminum in Whistler, B.C.; this bottom bracket will keep your cranks spinning smoothly. Our staff has carefully crafted every part except for the quality Enduro bearings we carefully selected for a mix of quality, value, and durability. Each bottom bracket includes: - BB cups with bearings - 2x Dust seals - 2x 0.5mm spacers - 2x 1mm spacers - 2x 2.5mm spacers Specifications: - Bearings: Enduro 71806 LLB ABEC-5 - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded - Bottom Bracket Shell Width: 83mm - Crank Spindle Diameter: 30mm - Tool Pattern: 46mm OD, 12 notch

Precision machined from 6061 T6 aluminum in Whistler, BC, this bottom bracket will keep your cranks spinning smoothly. Our staff has carefully crafted every part except for the quality Enduro bearings we carefully selected for a mix of quality, value, and durability. Each bottom bracket includes: - BB cups with bearings - 2x Dust seals - 2x 0.5mm spacers - 2x 1mm spacers - 2x 2.5mm spacers - 1x 4.5mm spacer (DUB only) Specifications: - Bearings: Enduro 71806 LLB ABEC-5 - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded - Bottom Bracket Shell Width: 83mm - Crank Spindle Diameter: SRAM DUB 29mm - Tool Pattern: 46mm OD, 12 notch

Running a conventional threaded bottom bracket on your BB30 or PF30 frame doesn't have to be complicated. This press-fit adapter from FSA goes in snug and opens up a lot of crankset possibilities for your BB30/PF30 frame. - Aluminum - Allows conventional threaded bottom brackets to be installed in a BB30 or PF30 frame - Install with headset press (not included) and green Loctite (included)

- Enables the use of a BB386EVO (30mm spindle) crankset on a 68mm English threaded frame

This FSA MegaExo bottom bracket is for use MTB MegaExo cranksets with 24mm spindles. - Sealed bearings - Die-cast then CNC machined alloy bearing cups - Composite Di2-compatible adjustable center sleeve

- Left and right bottom bracket cups with standard bearings for FSA MegaExo cranks - BB-9050 is for 24mm spindle 68/73mm MTB K-Force and Team Issue cranks - BB-8681 for K-Force Light (a non-ceramic option) and SLK Light Road MegaExo cranks (BB-8681 bearing covers have been redesigned so that the spindle now rides directly on the bearing itself) - BB-7000 is for 24mm spindle 68/73mm shell MTB Gravity Lite, Moto X and Afterburner cranks - BB-7000 is for 24mm spindle 83mm shell MTB Gravity Lite cranks - BB-6200 is for 24mm spindle 68mm shell Energy, Gossamer and Omega No Bolt Design cranks - BB-6000 is for 24mm spindle 68mm shell Energy, Gossamer and Omega cranks - BB-4000 is for 19mm spindle 69mm shell Omega cranks - BB-1000 is for 19mm spindle 68/73mm MTB Gamma cranks - 1.37" x 24tpi (English threads) or M36 x 24tpi (Italian threads)

- BBright Bottom Bracket to Mega Exo Carbon Crank BB-PF79 (EE086) - Spindle Interface Type: FSA MegaExo, Shimano Hollowtech II - BB Shell Width (mm): 79 – 84.5 - Bottom Bracket Shell I.D.: 46 - BB/Frame Interface: BBright Direct Fit

FSA (Full Speed Ahead) MegaExo 19 bottom brackets are for use with 19mm diameter spindles. - For Alloy Cranks with MegaExo 19 BB-AL86/19/SLE - Spindle Interface Type: FSA MegaExo 19 - BB Shell Width: 86mm - Bottom Bracket Shell I.D.: 41 - BB/Frame Interface: BB86

Designed for BB86/BB92 frames (with 41mm ID press-fit BB shell) - Compatible with 30mm crankset spindles - Flanged, double-row bearings with anti-corrosion Black Oxide/Magnetite treated, 52100 High-Carbon Chromium alloy races paired with grade 10 balls. Vendor Part # BK-7018

Designed for BB86/BB92 frames (with 41mm ID press-fit BB shell) - Compatible with 30mm crankset spindles. - XD-15 Ceramic-Hybrid cartridge bearings pressed directly into the BB shell, that feature - Deep-groove raceways allowing for maximum sized Grade 3 Silicon Nitride ceramic balls, increased contact area and improved performance and longevity. Vendor Part # BKC-7021

Enduro's entry level bottom bracket solution - Compatible with Sram GXP crankset spindles on BB92 framesets - ABEC-3 bearingss - Machined Delrin cups, Black Vendor Part # BK-6005

Designed for frames with threaded BSA 68mm or 73mm BB shell - Compatible with SRAM DUB cranksets (28.99mm spindle) - Stainless steel angular contact bearings: 440C Stainless steel balls and races - Machined aluminum cups, Black ano Vendor Part # BKS-6056

Designed for frames with threaded BSA 73mm BB shell - Compatible with cranksets with a 24mm spindle. - Stainless steel angular contact bearings: 440C Stainless steel balls and races - Machined aluminum cups, Black ano Vendor Part # BKS-6042

Designed for frames with threaded BSA 68mm BB shell - Compatible with cranksets with a 24mm spindle. - Stainless steel angular contact bearings: 440C Stainless steel balls and races - Machined aluminum cups, Black ano Vendor Part # BKS-6041

MaxHit is Enduro's latest patent-pending innovation; where the bearing is actually the component. MaxHit bottom bracket bearings are designed to thread directly into your bicycles bottom bracket shell, eliminating the need for the aluminum cups that are traditionally used to carry the bearings. This unique design frees-up space for much larger balls that more than double the load capacity compared to standard BB bearings. Machined entirely from 440C stainless steel and guaranteed for life, MaxHit BB bearings include proprietary double-lip labyrinth seals and Enduros extra high pressure grease to ensure a lifetime of trouble-free, heavy duty performance. Made in the USA Vendor Part # BKSM-8122

MaxHit is Enduro's latest patent-pending innovation; where the bearing is actually the component. MaxHit bottom bracket bearings are designed to thread directly into your bicycles bottom bracket shell, eliminating the need for the aluminum cups that are traditionally used to carry the bearings. This unique design frees-up space for much larger balls that more than double the load capacity compared to standard BB bearings. Machined entirely from 440C stainless steel and guaranteed for life, MaxHit BB bearings include proprietary double-lip labyrinth seals and Enduros extra high pressure grease to ensure a lifetime of trouble-free, heavy duty performance. Made in the USA

Enduro's entry level bottom bracket solution - Compatible with Sram GXP crankset spindles on PF30 framesets - ABEC-3 bearings - Machined Delrin cups, Black Vendor Part # BK-6007

Fits T47 frames with threaded BB shell (46mm ID x 68mm wide) - Compatible with most 24mm crank spindles (Shimano, FSA, etc) - Stainless bearings: Angular contact, 440C Stainless steel balls and races - Machined alloy cups - Made in the USA - Weight: 133g Vendor Part # BKS-0231

Fits T47 frames with threaded BB shell (46mm ID x 68mm wide) - Compatible with Sram DUB 29mm spindles - Stainless bearings: Angular contact, 440C Stainless steel balls and races - Machined alloy cups - Requires TorqTite BB cup wrench for installation (sold separately) - Made in the USA - Weight: 105g Vendor Part # BKS-0226

Enduro XD-15 Pro bearings offer a 15° angular contact sealed bearing in a standard-sized cartridge, pressed into precision machined aluminum cups. XD-15 Pro bearings feature deep-groove raceways allowing for maximum sized Grade 3 Silicon Nitride ceramic balls for for increased contact area and improved performance and longevity. For T47 threaded bottom bracket shell, and a Sram crankset with a 29mm spindle Made in the USA Vendor Part # BKC-0771

Fits T47 frames with threaded BB shell, internal bearing cup for 86mm shell frames - Compatible with most 30mm crank spindles, spindle length 104mm or longer - Stainless bearings: Angular contact, 440C Stainless steel balls and races - Machined alloy cups - Made in the USA Vendor Part # BKS-0241